Sunday 2 November 2014

Talk Cartridges

Shotgun cartridges have so many different varieties there are different lengths, loads, calibers,  shot and wad. I don't want to bore you by going in depth of what all of these mean but i will briefly go over them to give you an idea.

  • Length -The cartridge length refers to the case length when fired. This will either be measured in millimetres or inches. This is dependent on your shotgun chamber size to find this out research the manufacturer online or visit your local gunsmith and I'm sure they can help.
  • Load or Payload -This will depend on the quarry, range and chamber length of your gun. For most game shooting with a 12 gauge gun, 28g, 30g and 32g would be the most common payloads. For high birds 34g would be ideal. You must remember that the use of large payloads, particularly in smaller calibers, poses some problems, especially recoil, and can cause damage to your gun.
  • Calibre - The most common size is 12 gauge, with up to 50% of the overall shotgun market in the UK. The 20 gauge shotgun is favoured by shooters uncomfortable with the weight and recoil of a 12 gauge gun. The next most popular sizes are 28 gauge and .410. Each gun can have a different purpose for example 12 gauge for pheasant and .410 for rats.
  • Shot - The size of the pellet/shot in the round. It means the diameter of the pellets is approx.
  • Wad – This is simple there are two types, plastic or fibre. In terms of money the plastic are (a bit) cheaper, but fibre are better for the environment and farm livestock. In terms of performance I personally can’t tell any difference and I shoot with both.


GAMEBORE 'Clear Pigeon'




No comments:

Post a Comment